 | Table
Saw. I can’t imagine doing this project without one. You need one
that can do 45 degree cuts, and which has a rip fence and sliding
guide with attack angle settings. |
| Electric
Drill. I actually use two – one for drilling pilot holes and other
holes and one with a screwdriver bit. Changes bits for screw holes
would take a lot of time otherwise. |
| Hacksaw |
| Hole
saw (for the lock hole) which fits into the electric drill. |
| Hammer |
| Sandpaper |
| Router
with ½” bit (you might be able to manage without this). |
| Jigsaw |
| String |
| Sticking
plaster (Band aids) |
| Patience |
